Centrix SA1DK Manual de instrucciones descargar pdf (Pagina 16)

12.9.4 Enrolling Primary and Secondary Codes using the Standard Method

1. Enter Programming Mode.

2. Press “7” to enter Menu 7.

The Door LED turns orange.

3.Enter3-digitUserSlotnumberbetween001to500

to indicate the user to who you want to enroll a

Primary or Secondary code.

Forexample,theUserSlot003representsUser#3.

 •IftheselectedslotdoesnothaveaPrimary

 Code,theModeLEDashesgreen,indicating

that the controller is ready to accept a Primary

Code.

 •IftheselectedslotalreadyhasaPrimaryCode

but does not have a Secondary Code, the Mode

 LEDashesred,indicatingthatthecontrolleris

ready to accept a Secondary Code.

 •IftheselectedslotalreadyhasaPrimaryand

Secondary Code, a long beep is emitted and

the controller returns to Normal Mode.

4. Present a proximity Card, or enter 4-digit PIN that you

want to assign as the Primary or Secondary Code for

this slot number.

5. If the Proximity Card or PIN that is entered is valid, the

ModeLEDstopsashingandthecontrollerisnowready.

You can either continue or stop enrolling codes.

 •Toenrollacode,enterthenext3-digitslotnumber

that you want to assign a code to, or press the # key

to move to the next slot number.

 •Tostopenrollingcodes,pressthe#keyfortwo

seconds to return the controller to Normal Mode.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Centrix SA1DK Manual de instrucciones Pagina 16